Steering Gear: Adjustments

Power Steering Gear, Adjusting

Special tools, testers and auxiliary items required

• Torque wrench (V.A.G 1331)

• Two technicians are required for adjustments. Adjust with engine off.

- Remove the noise insulation.

- Bring the steering gear into the center position. Refer to => [ Centering Steering ] Procedures.

- Turning the steering wheel back and forth (approximately 30° off center axis) will produce a rattling noise if steering play is too large.

- The second mechanic must carefully screw the adjustment screw - arrow - until the knocking noise can no longer be heard inside the vehicle.






- Carry out a road test.

- Make sure that when maneuvering or negotiating corners the steering self-centers without sticking, adjust if necessary.