Clean Working Conditions
Clean Working Conditions
• Thoroughly clean all connections and the surrounding area before disconnecting.
• Clean the transmission and transmission components using Cleaning Solution (D 009 401 04).
• Use lint-free cloths when cleaning. Audi recommends the "WYPALL X70/WORKHORSE" cloth made by Kimberly-Clark Professional.
• Seal all open lines and connections immediately with clean plugs or caps from the Engine Bung Set (VAS 6122).
• Place parts that have been removed on a clean surface and cover. Use foil or lint-free cloths.
• Carefully cover over opened components or seal, if repairs are not carried out immediately.
• Only install clean components: Only unpack replacement parts immediately prior to installation.