Selector Lever Cable, Bringing Into Basic Setting
Selector Lever Cable, Bringing into Basic Setting
Special tools, testers and auxiliary items required
• Vehicle Diagnosis, Testing and Information System (VAS 5051B)
Procedure
• "Guided Fault Finding" with the (VAS 5051B) is completed and all faults have been corrected.
- Select the following menu entries on the (VAS 5051B) in "function/component selection" in Guided Fault Finding:
• "Drive "
• "0B6-Transmission"
• "01 - On Board Diagnostic (OBD) capable systems"
• "02-transmission electronics"
• "02-Transmission electronics, functions"
• "02-Read measured value "
- Select the measured value "gear" on the (VAS 5051B).
- Compare the following displays:
• Measured value "gear" on the (VAS 5051B)
• Selector lever position
• Selector lever transmission range position display unit (Y26) on the shift mechanism
• Transmission range display (Y6) in the instrument cluster
Conditions:
• The displays must match
If the displays do not match:
- Adjusts the selector lever cable. Refer to => [ Selector Lever Cable, Adjusting ] Adjustments.
If the individual displays cannot be reached by adjusting the selector lever cable:
Selector Lever Cable, Bringing Into Basic Setting:
• Tightening specification, refer to => [ Selector Lever Cable Overview ] 0B6A Automatic Transmission.
- Remove selector lever cable for selector shaft lever. Refer to => [ Selector Lever Cable ] Selector Lever Cable.
• Do not bend or kink the selector lever cable.
- Push the selector shaft lever - 1 - on the transmission all the way back - arrow -, until the parking lock engages.
• When parking lock is engaged, it must not be possible to turn the front wheels.
- Press the selector shaft lever forward three detents so the transmission is in "D".
- Make sure the selector lever inside the vehicle is also in "D".
- Select "read measured values" on the (VAS 5051B) in Guided Fault Finding "02 - transmission electronics".
- Select "measured value gear" on the (VAS 5051B).
- Compare the following displays:
• "Measured value gear" on the (VAS 5051B)
• Selector lever position
• Selector lever transmission range position display unit (Y26) on the shift mechanism
• Transmission range display (Y6) in the instrument cluster
Conditions:
• The displays must match
- Carefully press the selector lever cable ball socket - 1 - in this position onto the selector shaft lever.
• Do not bend selector shaft lever when pressing on, otherwise shift mechanism can no longer be adjusted exactly.
• Ignore - 2 -.
- Adjust the selector lever cable. Refer to => [ Selector Lever Cable, Adjusting ] Adjustments.
- Selector mechanism, checking, refer to => [ Selector Mechanism, Checking ] Selector Mechanism, Checking.