Lower Backrest Fan 2 (V417)/(V418)

Lower Backrest Fan 2 (V417)/(V418)

Removing






- Remove backrest cover panel. Refer to => [ Backrest Cover ] Backrest Cover.

- Adjust the lumbar support to the highest curve while moving the slider - 1 - all the way down - arrow A -.

• Ignore - 2 -.

- Disconnect electrical harness connector - 1 -.






- Carefully tilt the backrest fan - 2 - out of the backrest upholstery - arrow -.

Installing






Installation is reverse of removal, but note the following:

• The mounting eyelets on the fan housing - 1 - face up and down.

• Place electrical wire - 2 - in the gap in the backrest cushion - arrow -.