Diagram 89/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Left front seat temperature sensor, Left front seat ventilation control module, Driver seat heating element, Driver backrest heating element, Driver seat bolster heater





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G344 - Left front seat temperature sensor Power Comfort Seat Component Overview

G355 - Humidity sensor

J255 - Climatronic control module Overview Of Control Modules

J800 - Left front seat ventilation control module Power Comfort Seat Component Overview

SD1 - Fuse 1 (on fuse panel D) Overview Of Fuses

ST2 - Fuse panel 2

SB3 - Fuse 3 (on fuse panel B) Overview Of Fuses

SB6 - Fuse 6 (on fuse panel B) Overview Of Fuses

T6f - 6-pin connector, under the driver seat

T8ai - 8-pin connector, in the driver seat

T8x - 8-pin connector

T16c - 16-pin connector Climatronic Control Module -J255- , A/C Comfort

T18c - 18-pin connector

Y7 - Automatic dimming interior rearview mirror

Z6 - Driver seat heating element Power Comfort Seat Component Overview

Z7 - Driver backrest heating element Power Comfort Seat Component Overview

Z31 - Driver seat bolster heater

(77) - Ground connection on B-pillar, lower left Locations

(96) - Ground connection 1 (in heated seats wiring harness)

(366) - Ground connection 1 (in main wiring harness)

(B272) - Positive connection (30) (in main wiring harness)

(B549) - LIN bus connection 2 (in main wiring harness)

* - Relay and fuse carrier under the driver seat

Next Diagram 89/3 (Tracks 15-28)