Diagram 60/41 (Tracks 547-560)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Humidity sensor, Light recognition sensor, Automatic high beam assist control module, Automatic dimming interior rearview mirror





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G355 - Humidity sensor

G399 - Light recognition sensor Headlamp Assist and Lane Assist Assembly Overview

J255 - Climatronic control module Overview Of Control Modules

J386 - Driver door control module Overview Of Control Modules

J387 - Front passenger door control module Overview Of Control Modules

J799 - Right front seat ventilation control module Power Comfort Seat Component Overview

J800 - Left front seat ventilation control module Power Comfort Seat Component Overview

J844 - Automatic high beam assist control module Headlamp Assist and Lane Assist Assembly Overview

J910 - Automatic dimming interior rearview mirror relay

T16c - 16-pin connector Climatronic Control Module -J255- , A/C Comfort

T20a - 20-pin connector, in the left front door

T20b - 20-pin connector, in the right front door

Y7 - Automatic dimming interior rearview mirror

(B427) - Mirror auto-dimming signal connection 1 (in main wiring harness)

(B428) - Mirror auto-dimming signal connection 2 (in main wiring harness)

(B549) - LIN bus connection 2 (in main wiring harness)

* - Only for vehicles with automatic dimming interior rearview mirror

*2 - Only for vehicles with seat ventilation

*3 - Refer to applicable convenience system wiring diagram

*4 - Only for vehicles with Start/Stop system

*5 - Only for vehicles with high beam assist

*6 - Data bus wire (CAN bus)

*7 - Only for vehicles without high beam assist

*8 - Only for vehicles with a sunroof

Previous Diagram 60/40 (Tracks 533-546)