Crankshaft, Cylinder Block - Fastener Tightening Specifications

Fastener Tightening Specifications






Ribbed Belt Pulley Side Sealing Flange - Tightening Specifications and Sequence

- Tighten the pulley side sealing flange bolts - arrow - in a diagonal sequence and in steps to 9 Nm.






Guide Frame Tightening Specifications and Sequence






• Replace bolts which have been tightened to an additional torque.

- Install both dowel sleeves into the cylinder block.

- Tighten the bolts in 3 steps according to the tightening sequence: