Cylinder Head, Valvetrain
Special Tools
Special tools, testers and auxiliary items required
• Hinged Socket (3220)
• Valve Seal Removal Tool (3364)
• Valve Stem Seal Driver (3365)
• Valve Cotters Asm/Dis-Asm Device (VAS 5161) with Knurled Spacer Ring (VAS 5161/23-1) and Guide Plate (VAS 5161/23)
Special tools, testers and auxiliary items required
• Puller (T10320)
• Camshaft Fitting Tool (T40094)
• Camshaft Fitting Too (T40095)
• Component of T40096 (T40096)
Special tools, testers and auxiliary items required
• Seal Puller - General Useage (2085)
• Retainer (3036)
• M10 x 1.25 x 40 hex bolt from Seal Installer (3241)
• Assembly Tool (T10053)
• Puller (T10320)
Special tools, testers and auxiliary items required
• Crankshaft Holder (3242)
• Diesel Injection Pump Locking Pin (3359)
• Key (T40049)
• 3.3 mm diameter drill bit
Special tools, testers and auxiliary items required
• Valve Seal Removal Tool (3364)
• Valve Stem Seal Driver (3365)
• Valve Cotters Asm/Dis-Asm Device (VAS 5161) with Knurled Spacer Ring (VAS 5161/23-1) and Guide Plate (VAS 5161/23)
• Engine and Transmission Holder (VAS 6095)
• Cylinder Head Tensioning Device (VAS 6419)
Special tools, testers and auxiliary items required
• Crankshaft Holder (3242)
• Socket (T40058)
• Adjusting Pin (T40060) (quantity: 2)
• Adapter (T40061)
• Adapter (T40062)
• Hinged Socket (3220)
• Compression Tester (V.A.G 1763) with Adapter (V.A.G 1763/8)
• Dial Gauge Holder (VW 387)
• Dial Gauge 0-10 mm (VAS 6079)
• Socket (T40058)
• Locking Pin (T40071)
• Pry Lever - Rmv Outside Mirror (80 - 200)
• Retainer (3036)
• Hose Clamps Up to 25 mm Dia. (3094)
• Engine Bung Set (VAS 6122)
• Puller (T10320)
