Diagram 64/12 (Tracks 141-154)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Engine Speed (RPM) Sensor, Engine Coolant Temperature (ECT) Sensor, Fuel Temperature Sensor, Exhaust Gas Temperature (EGT) Sensor 2, Engine Coolant Temperature (ECT) Sensor (on Radiator)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G28 - Engine Speed (RPM) Sensor Locations

G62 - Engine Coolant Temperature (ECT) Sensor Locations

G81 - Fuel Temperature Sensor Locations

G83 - Engine Coolant Temperature (ECT) Sensor (on Radiator) Locations

G448 - Exhaust Gas Temperature (EGT) Sensor 2 Locations

J623 - Engine Control Module (ECM) Overview Of Control Modules

T3i - 3-Pin Connector, grey, on engine speed (RPM) sensor

T10m - 10-Pin Connector, black, connector station electronics box plenum chamber Overview of Connector Stations

T14k - 14-Pin Connector, black, in right engine compartment

T60 - 60-Pin Connector, black, on engine control module (ECM) Locations

(281) - Ground Connection 1 (in engine pre-wiring wiring harness)

(609) - Ground Connection (in plenum chamber, right) Locations

(D114) - Connection 12 (in engine compartment wiring harness)

* - Through October 2008

** - From November 2008

Previous Diagram 64/11 (Tracks 127-140)

Next Diagram 64/13 (Tracks 155-168)