Operation CHARM: Car repair manuals for everyone.

Diagram 64/13 (Tracks 155-168)






IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Throttle Valve Control Module, Exhaust Gas Recirculation (EGR) Cooler Switch-Over Valve, Exhaust Gas Recirculation (EGR) Cooler Switch-Over Valve 2, Oil Pressure Regulation Valve





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J338 - Throttle Valve Control Module Locations

J623 - Engine Control Module (ECM) Overview Of Control Modules

N345 - Exhaust Gas Recirculation (EGR) Cooler Switch-Over Valve Locations

N381 - Exhaust Gas Recirculation (EGR) Cooler Switch-Over Valve 2 Locations

N428 - Oil Pressure Regulation Valve Locations

T10m - 10-Pin Connector, black, connector station electronics box plenum chamber Overview of Connector Stations

T17d - 17-Pin Connector, white, connector station electronics box plenum chamber Overview of Connector Stations

T60 - 60-Pin Connector, black, on engine control module (ECM) Locations

T94 - 94-Pin Connector, black, on engine control module (ECM) Locations

(281) - Ground Connection 1 (in engine pre-wiring wiring harness)

(D115) - Connection 13 (in engine compartment wiring harness)

Previous Diagram 64/12 (Tracks 141-154)

Next Diagram 64/14 (Tracks 169-182)