Keyless Access Authorization Antenna Reader (J723)

Keyless Access Authorization Antenna Reader (J723)

Removing






4-/5-Seater:

- Remove luggage compartment left and right side trim..

- Remove the luggage compartment floor - 1 - upward - arrows -.

6-/7-Seater:






- Remove luggage compartment right side trim..

- Remove luggage compartment floor covering - 1 - upward - arrows -.

Vehicles With Control Module Bracket:






- Release retaining clips - arrows - and pivot Towing Recognition Control Module (J345) - item 1 - out of retaining frame.

- Disconnect the connectors - 2 - and - 3 -.

- Remove Navigation System with CD Drive Control Module (J401).

- Remove air suspension control module.

- Remove bolt - 4 - and nuts - 2 - and - 6 -.






- Using a long wrench - 5 -, remove nut - 1 - at rear of control module bracket - 3 -.

- Remove control module bracket.

All Vehicles






- Detach relays or control modules and then unclip appropriate plug-in socket.

- Release retaining clips - arrows - and press fuse panels - 1, 2, 4 - back out of relay and fuse panel.

- Remove the nuts - 3 - and - 5 - and then remove the relay and fuse panel.

Vehicles Without Bracket For Control Modules:






- Remove nut - 6 -.

All Vehicles

- Remove nut - 4 - and remove retaining frame - 5 - slightly to side.

- If present, remove screws - 1 - and - 2 - and remove Telephone Amplifier (R86) - item 3 -.

- Remove retaining frame with control modules and lay it aside with electrical wiring connected.

- Release retaining clips - arrows - and remove Keyless Access Authorization Antenna Reader (J723) - item 1 - from retaining frame.






- Disconnect electrical connector - 2 -.

Installing

Install in reverse order of removal, observing the following:

- Install control module retaining frame.

- Install relay and fuse panel in luggage compartment => [ Right Luggage Compartment Relay and Fuse Panel ] Right Luggage Compartment Relay and Fuse Panel.

- Install luggage compartment side trim.