3rd Seat Row Assembly Overview

3rd Seat Row Assembly Overview

• When installing the seat frame, follow the screw installation sequence.

- Position screws - 1 - in sequence - A -, - B -, - C - and - D - and tighten to the specification in same sequence.






1 Screw, self-locking

• 50 Nm

• Always replace if removed

• Clean nut threads before installing new screws

• Observe installation sequence

2 Headrest

• Headrest => [ Headrest Assembly Overview ] Headrest Assembly Overview

• Removing and Installing, refer to => [ Headrest ] Headrest

3 Bench seat

• Removing and Installing, refer to => [ Seat Bench, 3rd Row ] Seat Bench, 3rd Row

4 Trim

• Clipped in

• Removing and Installing, refer to => [ Trim ] Trim

5 Handle

• Clipped on

• Removing and Installing, refer to => [ Handle ] Handle

6 Cover

• Removing and Installing, refer to => [ Cover ] Cover

7 Seat cushion

• Removing and Installing, refer to => [ Seat Cushion, 3rd Row ] Seat Cushion, 3rd Row

8 Center bearing cover

• Clipped on

• Removing and Installing, refer to => [ Center Bearing Cover ] Center Bearing Cover

9 Mounting grommet

• Removing and Installing, refer to => [ Mounting Grommet ] Mounting Grommet

• Must be replaced each time seat cushion is removed

10 Carpet