DVD Player Retaining Plate

DVD Player Retaining Plate

Removing






- Remove front backrest cover and upholstery. Refer to => [ Backrest Cover and Upholstery ] Backrest Cover and Upholstery.

- Remove the bolts - 2 -.

- Remove the retaining plate - 3 - for the screen console.

- Remove the nut - 2 -.






- Guide socket - 4 - and washer - 3 - out of mount - 1 -.

Installation

Installation is reverse of removal, noting the following:

- Pull washer - 3 - up and slide socket - 4 - from the side into mount - 1 -.

• The socket must fit in the center of the mount.

- Hold the socket in this position and tighten the nut.

- Install the retaining plate hooks into the backrest frame - 1 - - arrows -.






- Tighten the bolts.

Tightening Specifications