Diagram 42/19 (Tracks 239-252)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Instrument Cluster Control Module, Fuel Pump (FP) Control Module, Fuel Level Sensor, Transfer Fuel Pump (FP), Fuel Level Sensor 2





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G - Fuel Level Sensor Fuel Pump and Sensors

G1 - Fuel Gauge

G6 - Transfer Fuel Pump (FP) Fuel Pump and Sensors

G169 - Fuel Level Sensor 2 Fuel Pump and Sensors

J285 - Instrument Cluster Control Module Overview Of Control Modules

J538 - Fuel Pump (FP) Control Module Fuel Pump and Sensors

T2k - Double Connector, black, under cover of vehicle floor

T4l - 4-Pin Connector, black, on left fuel container

T4m - 4-Pin Connector, black, on right fuel container

T5k - 5-Pin Connector, black, under left cover of rear vehicle floor

T32a - 32-Pin Connector, grey, on instrument cluster control module

Y24 - Display Unit in Instrument Cluster

(61) - Ground Connection (on left C-pillar) Locations

(62) - Ground Connection (on right C-pillar)

(86) - Ground Connection 1 (in rear wiring harness)

(410) - Sensor Ground Connection 1 (in main wiring harness)

* - Output Sensor

** - Through October 2006

*** - From November 2006

# - Only tank prewiring

## - Not applicable, phased-in

Previous Diagram 42/18 (Tracks 225-238)

Next Diagram 42/20 (Tracks 253-266)