Left Rear Temperature Door Motor (V313)

Left Rear Temperature Door Motor (V313)

• With the Left Rear Temperature Door Position Sensor (G391)

Removing

- Switch off ignition.

- Bring rear heating & A/C unit into service position, refer to => [ Rear Heating & A/C Unit, Bringing Into Service Position ] Rear Heating & A/C Unit, Bringing Into Service Position.

- Remove (unhook) lever - 1 - from Left Rear Temperature Door Motor.

- Remove screws - 2 -.






- Disconnect electrical connection from Left Rear Temperature Door Motor and remove control motor.

Installing

- Install the removed components again in reverse order.

- Check DTC memory of Climatronic Control Module (J255) (and of Rear A/C Display Control Head (E265) ) and erase any DTCs displayed using Vehicle Diagnosis, Testing and Information System VAS5051 in the "Guided Fault Finding" function.

- If necessary, perform a basic setting and output diagnostic test mode on the A/C system using Vehicle Diagnosis, Testing and Information System VAS5051 in the "Guided Fault Finding" function.