Instrument Panel Cover, Lower Driver Side

Instrument Panel Cover, Lower Driver Side

Removing






- Remove screws - 2 - and - 3 -.

- Grasp lower driver side instrument panel cover at upper edge and pull down slightly - arrow A -.

- Unclip 16-Pin Connector (T16) - item 1 -.

- Disconnect footwell light electrical connector - 4 -.

- Remove lower driver side instrument panel cover - arrow B -.

Installation

To install, perform the steps used in removal in reverse order.

• For the correct tightening specifications, refer to => [ Instrument Panel Covers On Driver Side Overview ] Instrument Panel Covers On Driver Side Overview.