Outer Bulb Holder

Outer Bulb Holder

Special tools, testers and auxiliary items required

• Trim Removal Wedge (3409)

LED tail lamps have LED bulbs and are integrated in the tail lamps. The LEDs cannot be replaced; the entire tail lamp must be replaced.

Removing






- Switch off ignition and remove ignition key.

- Turn light switch into "0" position.

- Pry out cover cap with (3409) - arrow -.

- Turn sockets - 1 - and - 2 - counterclockwise.






- Remove the bulb sockets from the tail lamp housing.

- Remove lamp from socket.

Installing

Install in reverse order of removal, observing the following:

- Insert new bulb into socket, do not touch glass cone with bare hands when doing so.

- Secure socket by turning clockwise.

- Place the cap - 1 - on the rear flap - 2 -, when doing this the mount - 3 - must fit into the notch in the body - arrow -.