Base Mount With Right Instrument Panel Fuse Panel

Base Mount with Right Instrument Panel Fuse Panel

Removing






- Remove the glove compartment.

- Pry off right cover from instrument panel using a screwdriver - arrow -.

- If present, remove screw - 1 - and remove air duct - 2 -.






- Release the retaining clips - arrows - and press the fuse panels - 2 through 4 - back and out of the base plate.






- Release fuse - 5 - and retaining spring and press right CAN connector (T46b) - item 6 - back out of base mount.

- Remove screws - 1 - and - 7 - and remove base mount back from instrument panel central tube.

Installing

Install in reverse order of removal, observing the following:

- Install the glove compartment.

Tightening Specifications