VAS 5051B, Connecting and Selecting Functions

VAS 5051B, Connecting and Selecting Functions

Special tools, testers and auxiliary items required

• Vehicle Diagnostic, Testing and Information System (VAS 5051 B) with corresponding diagnostic cable.

• During a test drive, the testing and measuring equipment must always be secured on the back seat.

• These devices may be operated only by a passenger during a test drive.

- Connect (VAS 5051 B) with corresponding diagnostic cable to vehicle.

- Turn vehicle diagnosis, testing and information system on.

Vehicle diagnosis, testing and information system is ready to operate when it displays operating modes in button fields.

- Turn on ignition.

• If control modules or electric/electronic components were replaced, component adaptation should generally be carried out in "Guided Fault Finding".

- Touch Guided Fault Finding.

- Select in succession:

• Brand

• Type

• Model year

• Version

• Engine Code

- Confirm data entered.

• Wait until tester has checked all control modules in vehicle.

- Press the go to button and select "function/component selection".

Then

- "Chassis (Repair group 01; 40 - 49)".

- "34 - Level control (Repair group 01: 43, 44)".

- "01- On Board Diagnostic (OBD) capable systems".

- "34 - Level control system control module ".

- "J197 - Level control system control module functions".

or

- "Chassis (Repair group 01; 40 - 49)".

- "34 - Level control (Repair group 01: 43, 44)"

- "01- On Board Diagnostic (OBD) capable systems".

- "34 - Level control system control module ".

- "Electrical components".