Offroad Style Package Door Gap Cover

Offroad Style Package Door Gap Cover

• Make sure the anti-friction films fit correctly on the door and that the edge protectors are installed before installing.

• Replace the film or protectors if necessary. Refer to => [ Replacing The Anti-Friction
Film ] Door Gap Cover.






1 Front Cover

- To remove, unclip to beginning at back.

• The rear cover must be installed before installing.

- The lower edge of the cover must engage into the lower edge of the door and the rear edge of the cover into the front door.

- Clip on cover beginning at back and working forward.

- Clips must engage audibly.

2 Front Door

3 Rear Door

4 Rear Cover

- To remove, unclip to beginning at back.

- The lower edge of the cover must engage into the lower edge of the door and the rear edge of the cover into the rear door.

- Clip on cover beginning at back and working forward.

- Clips must engage audibly.

5 Clip

6 Plastic Band

7 Clip

• 12 for the front door and 8 for the rear door.

• The clips must engage when the cover is installed.

Fender Cover Strip






1 Bolt

• 2 Nm

2 Fender

3 Cover

• Press onto the fender with force when installing.

4 Double Sided Adhesive Tape

5 Clip

• Install 4 clip into the cover.