Front and Rear Door Trim Molding

Front and Rear Door Trim Molding






1 Front Door

2 Front Door Trim Molding

• To remove, warm with hot air gun if necessary.

• Clean adhesion surface with Cleaning Solution (D 009 401 04).

• Peel off protective foil from adhesive tape.

• First attach trim molding in B-pillar area.

• Position trim molding in mirror triangle and press it in completely.

• Vehicle wait time approximately 2 hours at room temperature.

3 Adhesive Tape

• Remove protective foil.

4 Rear Door

5 Rear Door Trim Molding

• Removal and installation same as with front trim molding.

6 Adhesive Tape

• Remove protective foil.