Diagram 18/3 (Tracks 15-28)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Access/Start Control Module, Access/Start Authorization Switch, Fuses





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E415 - Access/Start Authorization Switch Overview Of Control Modules

J518 - Access/Start Control Module Access/Start Authorization System Component Overview

SB6 - Fuse 6 (on fuse panel B) Overview Of Fuses

SB8 - Fuse 8 (on fuse panel B) Overview Of Fuses

SB10 - Fuse 10 (on fuse panel B) Overview Of Fuses

T2a - Double Connector, black, on access/start authorization switch

T3a - 3-Pin Connector, black, on access/start control module

T6a - 6-Pin Connector, on access/start authorization switch

T20e - 20-Pin Connector, black, on access/start control module

T46a - 46-Pin Connector, black, left CAN separating connector

(45) - Ground Connection (behind instrument panel, center) Locations

(B165) - Plus Connection 2 (15) (in interior wiring harness)

(B272) - Plus Connection (30) (in main wiring harness)

(B326) - Plus Connection 12 (30a) (in main wiring harness)

• - CAN-Bus (data wire)

♦ - Through May 2007

♦♦ - from June 2007

Previous Diagram 18/2 (Tracks 1-14)

Next Diagram 18/4 (Tracks 29-42)