Sunroof / Moonroof: Testing and Inspection

Motor Adaptation

• Perform an adaptation to the motor after replacing a motor, a glass panel or the power sun shade.

• The following example describes adaptation of the glass panel motor 1.

• The adaptation for the other motors is the same.

• Proceed as follows.

- Switch ignition on, all doors are closed.

- Pull motor/panel operating switch 1 down and hold it firmly in this position during entire adaptation process.

- After 10 seconds, panel 1 tilts, moves approximately 200 mm back in roof open position or sun shade opens, slides back into tilt position and then panel closes again.

- Release the switch after the glass panel has closed. The adaptation procedure is complete.