Headrest Assembly Overview

Headrest Assembly Overview






1 Headrest cover

• Clipped in

• Removing and Installing, refer to => [ Headrest Cover ] Headrest Cover

2 Screw, self-locking

• 10 Nm

• Always replace if removed

• Clean nut threads before installing new screws

3 Headrest

• Removing and Installing, refer to => [ Headrest ] Headrest

4 Clip

• Depending on the version

5 Cable

• Is a component of the head restraint

• Cable routing depends on the version

• Removing and Installing, refer to => [ Headrest ] Headrest

6 Cover and upholstery

• Removing and Installing, refer to => [ Headrest Cover and Upholstery ] Headrest Cover and Upholstery

7 Mounting pins

8 Spring

• Stored on the mounting pins

• Attached to the backrest frame and control cam

• Removing and Installing, refer to => [ Head Restraint Control Cam ] Head Restraint Control Cam

9 Control cam

• Stored on the mounting pins

• Removing and Installing, refer to => [ Head Restraint Control Cam ] Head Restraint Control Cam

10 Securing clip

• Placed on the mounting pin

• Removing and Installing, refer to => [ Head Restraint Control Cam ] Head Restraint Control Cam