Comfort Front Seat Overview
Comfort Front Seat Overview
• The overview is based on the driver seat. The passenger seat is similar and the components are installed reversed from left to right.
• The illustration does not show the floor covering.
1 Connector Station
• Connector routing, refer to => [ Connector Station Assignment ] Connector Station Assignment.
• Disconnect the connector. Refer to => [ Disconnecting and Connecting Harness Connectors ] Disconnecting and Connecting Harness Connectors.
2 Front Spindle Cover
• Quantity: 2
• Clipped in
• Removing and installing, refer to => [ Seat Rail Covers ] Seat Rail Covers.
3 Front Cover
• For the seat rail.
• Quantity: 2
• Removing and installing, refer to => [ Seat Rail Covers ] Seat Rail Covers.
4 Trim
• Overview, refer to => [ Sill and Tunnel Side Trim Panels ] Sill and Tunnel Side Trim Panels.
• Removing and installing, refer to => [ Trim ] Trim.
5 Belt Latch
• Removing and installing, refer to => [ Belt Latch Anchorage Point ] Belt Latch Anchorage Point.
6 Tunnel Side Trim
• Overview, refer to => [ Sill and Tunnel Side Trim Panels ] Sill and Tunnel Side Trim Panels.
• Removing and installing, refer to => [ Trim, Tunnel Side ] Trim, Tunnel Side.
7 Front Seat - Comfort Seat
• Removing and installing, refer to => [ Front Seat ] Front Seat.
• Seat frame overview. Refer to => [ Seat Frame Overview ] Seat Frame Overview.
8 Headrest
• Overview, refer to => [ Headrest Overview ] Headrest Overview.
• Removing and installing, refer to => [ Headrests With Locking Mechanism ] Headrests With Locking Mechanism.
9 Backrest Cover
• Overview, refer to => [ Backrest Cover Overview ] Backrest Cover Overview.
• Removing and installing, refer to => [ Backrest Cover ] Backrest Cover.
10 Sill-Side Trim
• Overview, refer to => [ Sill and Tunnel Side Trim Panels ] Sill and Tunnel Side Trim Panels.
• Removing and installing, refer to => [ Trim, Sill Side ] Trim, Sill Side.
11 Rear Spindle Cover
• Quantity: 2
• Connected
• Removing and installing, refer to => [ Seat Rail Covers ] Seat Rail Covers.
12 Rear Cover
• For the seat rail.
• Quantity: 2
• Removing and installing, refer to => [ Seat Rail Covers ] Seat Rail Covers.
13 Assembly Cover
• Clipped
• Removing and installing, refer to => [ Assembly Cover ] Assembly Cover.
14 Actuator
• For the lumbar support.
• Overview, refer to => [ Lumbar Support Adjustment Switch (E176)/(E177) ] Lumbar Support Adjustment Switch (E176)/(E177).
• Lumbar support adjustment switch, removing and installing, refer to => [ Lumbar Support Adjustment Switches ] Lumbar Support Adjustment Switches.
• Four-way lumbar support, removing and installing, refer to => [ Four-Way Lumbar Support ] Four-Way Lumbar Support.
15 Actuator
• For backrest adjustment.
• Overview, refer to => [ Fore and Aft, Inclination, Height and Backrest Adjustment Switch (E418)/(E421)/(E424)/(E425) ] Fore and Aft, Inclination, Height and Backrest Adjustment Switch (E418)/(E421)/(E424)/(E425).
• Actuator, removing and installing, refer to => [ Backrest Adjustment Switch (E425) ] Backrest Adjustment Switch (E425).
• Switch and button, removing and installing, refer to => [ Seat Adjustment Motors ] Seat Adjustment Motors.
16 Actuator
• For seat forward/back, tilt, and height adjustment.
• Overview, refer to => [ Fore and Aft, Inclination, Height and Backrest Adjustment Switch (E418)/(E421)/(E424)/(E425) ] Fore and Aft, Inclination, Height and Backrest Adjustment Switch (E418)/(E421)/(E424)/(E425).
• Actuator, removing and installing, refer to => [ Seat Adjustment Switch ] Seat Adjustment Switch.
• Switch and button, removing and installing, refer to => [ Seat Adjustment Motors ] Seat Adjustment Motors.
17 Bolt
• 45 Nm
• Quantity: 4