Seat Forward/Back Adjustment Motor V288

Seat Forward/Back Adjustment Motor V288

Special tools, testers and auxiliary items required

• Engine and transmission holder (VAS 6095)






• Fixture for seat repair (VAS 6136)






• Move the seat up if possible.

• If the motor is faulty, the complete lower seat pan frame must be replaced.

• Seat is shown without upholstery and without backrest in picture for the sake of a better illustration.

Removing

Follow all safety precautions when working on pyrotechnic components. Refer to => [ Restraint System Components, Safety Precautions and General Information ] Restraint System Components, Safety Precautions and General Information.

- Remove the front seat. Refer to => [ Front Seat in Case of a Faulty Control Module or Seat Forward/Back Adjustment Motor ] Front Seat In Case of a Faulty Control Module or Seat Forward/Back Adjustment Motor.

- Separate the seat pan upper frame from the lower frame. Refer to => [ Seat Pan, Disassembling and Assembling ] Seat Pan, Disassembling and Assembling.

Installation

Follow all safety precautions when working on pyrotechnic components. Refer to => [ Restraint System Components, Safety Precautions and General Information ] Restraint System Components, Safety Precautions and General Information.

- Assemble the new lower seat pan frame, and the transverse member and traverse and the seat forward/back adjustment motor (V288) to the upper seat pan frame. Refer to => [ Seat Pan, Disassembling and Assembling ] Seat Pan, Disassembling and Assembling.

- Connect the connector to the seat forward/back adjustment motor (V288).

- Install the front seat. Refer to => [ Front Seat ] Front Seat.