Cooling System: Testing and Inspection

Cooling System, Checking for Leaks

Special tools, testers and auxiliary items required

• Cooling System Tester (V.A.G 1274 B)

• Adapter (V.A.G 1274/8)

• Adapter (V.A.G 1274/9)

Procedure

• Engine at operating temperature.

Risk of scalding due to hot steam and hot coolant.

• When the engine is warm the cooling system is under pressure.

• To reduce pressure, cover coolant reservoir cap with cloth and carefully open.

- Position the (V.A.G 1274 B) with the (V.A.G 1274/8) on the coolant reservoir.





- Generate a positive pressure of approximately 1.0 bar using hand pump of cooling system tester.

If the pressure drops:

- Search for leaking areas and repair the malfunction.

Pressure relief valve in cap, checking





- Attach (V.A.G 1274 B) with (V.A.G 1274/9) to sealing cap.

- Generate a positive pressure using hand pump of cooling system tester.

• The pressure release valve must open at 1.4 to 1.6 bar.

If check-valve does not open as indicated:

- Replace cap.