High-Mounted Brake Lamp Bulb

High-Mounted Brake Lamp Bulb

Removing






- Do not press brake pedal.

- Remove the rear lid upper trim panel..

- Remove roof spoiler..

- Remove the screws - 2, 3 and 4 -.

- Carefully press both outer retaining points on retaining springs together - A arrows - and slide high-mounted brake light - 1 - off roof spoiler - arrow B -.

• Entire high-mounted brake light must be replaced in the event of faulty LEDs.

Installing

Install in reverse order of removal, observing the following:

- Install roof spoiler..

- Install the rear lid upper trim panel..