Front Axle Camber, Adjusting

Front Axle Camber, Adjusting

- Remove connector nut - 2 - and install new nut as far as stop.






- Adjust camber by rotating eccentric bolt.

• The maximum adjustment range is 90° to left or right of center position.

- Tighten nut - 2 - with Socket (T10188) - item 12 - => [ (Item 12) Self-Locking Nut ] Front Axle Overview.

- After nut - 2 - has been tightened, check camber value again.

Every time camber is corrected, axle alignment values should be checked.