Removal and Replacement

EVAP System Overview






1 Vent Line

• To Evaporative Emission (EVAP) canister purge regulator valve 1 (N80)

2 Vent Line

• To fuel tank

3 Vacuum Line

• Diagnostic pump/engine

4 Bolt

• 1.2 Nm

5 Gasket

6 Leak Detection Pump (LDP) (V144)

• Installed location: Under wheel housing liner in right rear wheel housing

• Checking in Guided Functions using a vehicle diagnostic tester

• Removing and installing, refer to => [ Leak Detection Pump (LDP) (V144) ] Service and Repair

7 Connecting Hose

• Leak diagnosis pump/air filter

8 EVAP Canister

• Installed location: Under wheel housing liner in right rear wheel housing

9 Rubber Grommet

10 Bushing

11 Bolt

• 9 Nm

12 Air Filter Housing

• For the leak detection pump

• No maintenance schedule