Body Emblem

Emblem Dimensions

Special tools, testers and auxiliary items required

• Roller (3356)

• The adhesive surfaces on the body must be free of dirt and grease.

• Clean the adhesive surfaces using Cleaning solution (D 009 401 04).

• Warm the adhesive areas to approximately 104° F (40°C) using a hot air gun.

• Press the emblems with the (3356) after installation.

Rear Lid Emblems






Through model year 2009

• Dimension - a - = 30 mm

• Dimension - b - = 638 mm

• Dimension - c - = 52 mm

• Dimension - d - = 55 mm

• Dimension - e - = 4 mm

• Dimension - f - = 532 mm

• Dimension - g - = 563 mm

• Dimension - h - = 663 mm

• Dimension -h- applies only to TDI vehicles

From model year 2010

• Dimension - a - = 33 mm

• Dimension - b - = 531 mm

• Dimension - c - = 82 mm

• Dimension - d - = 82 mm

• Dimension - e - = 4 mm

• Dimension - g - = 531 mm

• Dimension - h - = 531 mm

Rear Lid Emblems For The 12 Cylinder Vehicle






Through model year 2009

• Dimension - a - = 25 mm

• Dimension - b - = 638mm

• Dimension - c - = 532 mm

• Dimension - d - = 55 mm

• Dimension - e - = 4 mm

• Dimension - f - = 670 mm

• Dimension - g - = 52 mm

From model year 2010

• Dimension - a - = 25 mm

• Dimension - b - = 638mm

• Dimension - c - = 532 mm

• Dimension - d - = 81 mm

• Dimension - e - = 4 mm

• Dimension - f - = 536 mm

• Dimension - g - = 82 mm

Fender Emblem For 12 Cylinder Vehicles






• Dimension -a- = 64 mm

• Dimension -b- = 64.5 mm

• Dimension -c- = 105 mm

Fender Emblem For The S Line






• Dimension -a- = 51.5 mm

• Dimension -b- = 52 mm

• Dimension -c- = 53 mm