Positioning Vehicle on Hoist and Wheels

Positioning Vehicle on Hoist and Wheels

Raising with Air Suspension System Not Open

- Turn on "Vehicle lift mode" before raising vehicle with hoist. Refer to => [ Vehicle Lift Mode ] Vehicle Lift Mode.

This ensures no uncontrolled air suspension system regulation is activated.

- Position the hoist lifting arms under the intended lift points on longitudinal members and raise vehicle.

Lowering with Air Suspension System Not Closed

- Lower the hoist and place the vehicle on wheels.

- Swing back hoist lifting arms.

- Turn off "vehicle lift mode" and set desired driving mode. Refer to => [ Vehicle Lift Mode ] Vehicle Lift Mode.

• "Vehicle lift mode" is automatically deactivated when the vehicle speed exceeds 10 km/h.

Lowering with Open Air Suspension System

- Lower hoist and place the vehicle on wheels.

If a vehicle is not high enough to swing the hoist lifting arms back (insufficient pressure in pressure reservoir), allow engine to run at idle. This switches the air supply unit compressor on.

- The air suspension system can also be filled in "Guided Fault Finding". Refer to => [ System, Venting or Filling ] System, Venting or Filling.

- Turn off the "vehicle lift mode" and set the desired driving mode. Refer to => [ Vehicle Lift Mode ] Vehicle Lift Mode.