Windshield Wiper Blades

Windshield Wiper Blades

Removing

• If the windshield wiper motor is to be run during the work procedure, the hood must be closed, otherwise the voltage supply of the wiper motor will be interrupted.

- Turn on the ignition and bring the windshield wiper into the service position using MMI. Refer to the Owner's Manual.

- Turn off the ignition.

- Lift off wiper arm from front windshield.






- Compress clip - arrows 1 -.

- Push wiper blade off wiper arm - arrow 2 -.

- Remove wiper blade.

Installing






Install in reverse order of removal, observing the following:

- Guide wiper arm tab - 2 - into wiper blade - 1 - - arrow -.

- Switch ignition on and activate one-touch wiping, the wipers then leave the service position.