Cellular Phone: Description and Operation

Telephone Systems

Cellular Phone Preparation

• Telephone Transceiver (R36)

• Radio/Telephone Antenna (R51) (GSM)

• Telephone Baseplate (R126) with Cellular Telephone (R54)

• Telephone Microphone (R38) (Microphone Unit In Front Roof Module (R164))

• Seat Belt Microphone Control Module (J886) with seat belt microphones - Spyder

The Telephone Transceiver is equipped with a Bluetooth Antenna (R152). Using this, all Cellular Telephones approved by Audi can be operated with the Bluetooth interface with the cell phone preparation installed in the vehicle.

The microphone unit (in front roof module) is installed in the Front Interior Lamp (W1).

Bluetooth Hands-Free Equipment

• Telephone Transceiver (R36)

• Telephone Microphone (R38) (Microphone Unit In Front Roof Module (R164))

• Seat Belt Microphone Control Module (J886) with seat belt microphones - Spyder

The telephone transceiver is installed with the microphone unit in front roof module / Bluetooth Antenna (R152) and is part of the hands-free setup. Bluetooth connects the Cellular Telephone (R54).

The Bluetooth antenna is attached to the telephone transceiver.

It is not possible to connect other devices via Bluetooth, for example headset, laptop, PDA, or similar.

Troubleshooting is preformed using Vehicle Diagnosis, Testing and Information System VAS 5051 in operating mode "Guided Fault Finding ".