Navigation System: Service and Repair

Navigation System with CD Drive Control Module

Special tools, testers and auxiliary items required

• Radio Removal Tool (T10057)

• Vehicle Diagnosis, Testing and Information System (VAS 5051)





- If control module is replaced, select "Replacement" function for appropriate control module in "Guided Fault-Finding" routine.

Use the (VAS 5051) to do so.

- Switch off all electrical consumers.

- Remove the key.

Removing

- Insert (T10057) into release slots on Navigation System with CD Drive Control Module (J401) until they engage. Points on grip eyes face outward.





- Remove the navigation system with CD drive control module from the instrument panel using the grip eyes on the (T10057).

- Release electrical connectors on navigation system with CD drive control module and remove it.

- Remove (T10057) by pressing locking tabs on navigation system with CD drive control module.

Installing

- Connect all electrical connectors.

- Slide navigation system with CD drive control module straight into instrument panel until it engages in installation frame.