Fender Mounting Flange

Fender Mounting Flange

Removing





Proceed as follows:

- Remove end plate => [ End Plate ] End Plate.

- Remove the fender => [ Fender ] Fender.

- Remove the bolts - arrows - and the front lid stop buffer - 1 -.

• The illustration shows the installation position with the fender installed.

- Remove bolts - arrows -.





- Remove the fender mounting flange from the A-pillar.

Installing

• Tightening specifications => [ Fender Assembly Overview ] Fender Assembly Overview.

Installation is reverse of removal, but note the following:

- Adjust the front lid stop buffer => [ Front Lid, Adjusting ] Adjustments.