Mirror Glass

Mirror Glass

Special tools, testers and auxiliary items required

• Pry lever (80 - 200)

• Protective gloves

Removing





Proceed as follows:

CAUTION!
Risk of injury!

• Wear protective gloves.

- Press the mirror glass - 1 - from the mirror adjusting unit using the pry lever (80 - 200) - arrow -.

- Disconnect the electrical connectors on the back of the mirror glass, if applicable.

Installing

Installation is reverse of removal, but note the following:

- Position the mirror glass on the mirror adjusting unit and press it on.

CAUTION!
There is a risk of it breaking.

• Only press the center of the mirror glass when pressing it on.