Headrests With Locking Mechanism

Headrests with Locking Mechanism

• The headrests can be removed with the seat installed.

• The release button is located on the outer left of the driver's seat and inner left of the passenger's seat (in direction of travel).

Removal





- Find release button pressure point - 3 -.

• The release button is approximately - a - = 95 mm under the upper edge of the backrest.

- Press the release button in the - direction of the arrow - toward the center of the seat.

- Hold the release button down in this position.

- Pull headrest - 1 - up out of headrest guides - 2 - and - 4 -.

Installation

Installation is reverse of removal, but note the following:

• Make sure the headrest is engaged correctly in the headrest guides.