Evaporative Emissions System

EVAP Canister and Leak Detection System Hose Routing





1 Intake Manifold

2 Non-Return Valve

• Installed position: the - arrow - points in the flow direction

3 To Intake Manifold Runner Control Valve (N316)

4 EVAP Canister Purge Regulator Valve 1 (N80)

• Installed location: inside the engine compartment on the right side

5 Ventilation Hose to Fuel Tank

• To disconnect, press release button on connection piece

6 EVAP Canister

• Installed location: under the right engine compartment trim

• Removing and installing, refer to => [ EVAP Canister ] EVAP Canister

7 Air Filter Housing

• For leak detection pump (V144)

8 Leak Detection Pump (V144)

• Installed location: under the wheel housing liner in right rear wheel housing

• Removing and installing, refer to => [ Leak Detection Pump ] Leak Detection Pump

9 To Vacuum Reservoir

10 To Exhaust Door Valve 1 (N321)