Front Interior Light/Reading Lamp LED, Replacing

Front Interior Light/Reading Lamp LED, Replacing

Special tools, testers and auxiliary items required

• Trim removal wedge (3409)

• If the LED is faulty, then the interior lamp/reading lamp must be replaced.





Removing

- Remove front interior/reading light. Refer to => [ Front Interior Lamp/Reading Lamp ]. Front Interior Lamp/Reading Lamp

- Slight lift the LED board - 1 - and - 3 - pull it in - direction of arrow - out of the socket - 2 -.

- Carefully pry the diffusion lens - 2 - using the (3409) out of the socket - 1 -.





- Remove the garage door opener control head (E284), if equipped. Refer to => [ Garage Door Opener Control Head ]. Garage Door Opener Control Head

Installing

Install in reverse order of removal, observing the following:

- Press the interior/reading lamp lens on until it engages.

- Insert interior/reading light into roof cutout and clip.