Operation CHARM: Car repair manuals for everyone.

HID Lamp Control Module






HID Lamp Control Module

CAUTION!
Danger to life due to high voltage.

Headlamps must be adjusted after performing measures that could influence headlamp adjustment. Refer to => [ Headlamps, Checking and Adjusting ] Adjustments.

Observe notes on contact corrosion. Refer to => [ Contact Corrosion ] Service Precautions.

Removing





- Remove headlamp. Refer to => [ HID Headlamp Housing ] HID Headlamp Housing.

- Remove screws - arrows -.

- Remove control module - 1 - from headlamp housing.

- Disconnect electrical connectors - 2 and 3 -.





- Remove the HID headlamp control module.

Installing

Tightening specification, refer to => [ Bi-Xenon HID Headlamps Assembly Overview ] Bi-Xenon HID Headlamps Assembly Overview.

Install in reverse order of removal, observing the following:

- Check seal - 1 - between gas discharge headlamp control module and headlamp housing for damage.

- Install headlamp. Refer to => [ HID Headlamp Housing ] HID Headlamp Housing.