Crankshaft, Cylinder Block - Fastener Tightening Specifications

Fastener Tightening Specifications





Vibration Damper, Tightening Specification and Sequence





- Tighten the bolt diagonally and in 3 steps as follows:

- Tighten the bolts to 15 Nm.

- Tighten the bolts to 22 Nm.

- Tighten the bolts an additional 90°.

Guide Frame Tightening Specifications and Sequence





- Replace bolts - 1 through 20 -.

- Tighten bolts - 1 through 20 - in 5 stages as follows:





- Tighten guide frame to cylinder block sealing surface bolts, - highlighted in illustration but not numbered -, in a diagonal sequence to 9 Nm.