Axle Shaft Assembly: Service Precautions

Drive Axle

Wheel bearing must not be burdened while drive axle threaded connection on the wheel side is loose.

If the wheel bearings are loaded by the vehicle's own weight, the wheel bearing will be damaged. The wheel bearings will be stressed and the life expectancy reduced. Therefore observe the following:

• Bolt loosening procedure:

Vehicles without drive axle must not be moved, otherwise wheel bearing will be damaged. If vehicle does have to be moved, always note the following points:

- Install an outer joint in place of the drive axle.

- Tighten outer joint to 200 Nm.

Do not let the drive shaft hang down. The inner joint could be damaged if it is bent too far.