Seat Belt Systems: Service and Repair
Seat Belts
=> [ Seat Belt Anchorage Points Overview ]
=> [ Center Floor Assembly Anchorage Points ]
=> [ Outer Front Floor Assembly Anchorage Point ]
Seat Belt Anchorage Points Overview
1 - Three-Point Safety Belt with Left and Right Front Belt Tensioner
• Refer to => [ Front Three-Point Seat Belt with Belt Tensioner ] Service and Repair.
2 - Three-Point Safety Belt with Left and Right Rear Belt Tensioner
• Refer to => [ Rear Three-Point Seat Belt with Belt Tensioner ] Service and Repair.
3 - Rear Center Floor Assembly Anchorage Point
• Refer to => [ Center Floor Assembly Anchorage Points ].
4 - Outer Front Floor Assembly Anchorage Point
• Refer to => [ Outer Front Floor Assembly Anchorage Point ].
5 - Safety Belt Latch Anchorage Point
• Belt latch on standard and memory seats
• Removing and Installing, Refer to => [ Belt Latch, Standard and Memory Seat ] Service and Repair
• Seat occupied recognition system passenger airbag deactivation safety belt latch (for certain countries)
• Removing and Installing, refer to => [ Passive Occupant Detection System Belt Latch ] Service and Repair
• Belt Latch, RS Sport Seat, refer to => [ Belt Latch, RS Sport Seat ] Service and Repair
Center Floor Assembly Anchorage Points
1 - Belt Latch
• Removing
- Remove the rear bench sea. Refer to => [ Rear Bench Seat ] Rear Seats.
- Remove nut - 4 -.
- Remove safety belt latch - 1 -.
• Installing
- Make sure the bracket - 2 - locks into the securing nub - 3 -.
- Install belt buckle - 1 - in reverse order of removal.
2 - Mount
3 - Securing Nub
4 - Nut
• Tightening specification 55 Nm.
Outer Front Floor Assembly Anchorage Point
Removing
- Pull off the cap - 3 -.
- Remove the bolt - 2 -.
• Tightening specification: 55 Nm.
- Remove the washer - 4 -.
- Turn bracket - 5 - upward.
- Remove the belt webbing - 1 - from the bracket - 5 -.
Installing
- Install the washer - 6 - under the bracket - 5 -.
- Install the outer floor assembly anchorage point in reverse order to removal.