Electrical System Control Module

Relay and Fuse Panels

CAUTION!
Before beginning repairs on the electrical system:

• Obtain the anti-theft radio security code.

• Switch the ignition off.

• Disconnect the battery Ground (GND) strap.

• After reconnecting vehicle battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows according to Repair Information and/or Owner's Manual.

• Steps after reconnecting voltage supply => Battery.

Electrical System Control Module

Removing

- Remove driver's storage compartment.

- Remove nuts - arrows - and remove Vehicle Electrical System Control Module (J519) Item - 1 -.





- Unclip fuse carrier - 1 - to 3-.





- Disengage securing bracket at connector - 4 - and remove.

- Unplug connectors - 5 - and - 6 -.

Installing

Installation is the reverse of removal.

Tightening Specifications