Front Seat, Bringing to Service Position

Front Seat, Bringing to Service Position

Special tools, testers and auxiliary items required

• Trim removal wedge (3409)

Service Position, Implementing

- Move seat as far back and up as possible.

• The surrounding area was not shown in the illustration for clarity purposes.

- Pry cover caps - 1 - from seat rail covers - 3 - and seat fore/aft adjustment spindle - 2 - with (3409).





- Open connector station cover - 1 - under front seat. Refer to => [ Modular Wire Routing with Corrugated Tube on Front Seat ] Modular Wire Routing with Corrugated Tube on Front Seat.





• The front seat was not shown in the illustration for clarity purposes.

• Do not disconnect electrical wires.

Service Position, Resetting

Installation is in reverse order of removal, noting the following:

- Engage cover correctly with connector station.