Diagram 136/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Distance Regulation Control Module, Distance Regulation Sensor Heater





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J329 - Power Supply Relay (terminal 15) Overview of Relay Carrier

J428 - Distance Regulation Control Module Locations

J533 - Data Bus On Board Diagnostic Interface Overview of Control Modules

SB10 - Fuse 10 (on fuse panel B) Overview of Fuses

T17e - 17-Pin Connector, red, connector station A-pillar, left Overview of Connector Stations and Connectors

T20p - 20-Pin Connector, black, on data bus on board diagnostic interface

Z47 - Distance Regulation Sensor Heater

(671) - Ground Connection 1 (on left front long member) Overview of Ground Connections in Front Part of Vehicle

(B108) - CAN-Bus Extended High Connection 1 (in main wiring harness)

(B109) - CAN-Bus Extended Low Connection 1 (in main wiring harness)

(B273) - Plus Connection (15) (in main wiring harness)

(C45) - Plus Connection 1 (15) (in front wiring harness)

- CAN-Bus (data wire)

# - 9-Pin relay carrier, behind driver's storage compartment