Oil Pump and Lower Oil Pan Section Assembly Overview

Oil Pump and Lower Oil Pan Section Assembly Overview





1 Oil pan lower section

• With Oil Level Thermal Sensor (G266)

• Lower section of oil pan, removing and installing, refer to => [ Oil Pan Lower Section ] Oil Pan Lower Section

• Oil Level Thermal Sensor (G266), removing and installing, refer to => [ Oil Level Thermal Sensor ] Service and Repair

2 9 Nm

• Tighten diagonally in 2 stages => [ Tighten bolts for lower section of oil
pan in 2 stages as follows. ] Oil Pan Lower Section

3 9 Nm

4 9 Nm

5 Oil pipe

6 Gasket

• Replace

7 O-ring

• Replace

8 O-ring

• Replace

9 9 Nm

10 Housing

• For oil cooler by-pass valve

11 Oil cooler by-pass valve

12 Gasket

• Replace

13 Oil check valve

14 O-ring

• Replace

15 9 Nm

16 9 Nm

17 Oil pipe

18 O-ring

• Replace

19 Alignment bushing

• 2 pieces

20 Driveshaft for coolant pump

21 Gasket

• Replace

22 Oil pump

• Do not disassemble

• With relief valve approximately 5.5 bar

• Removing and installing, refer to => [ Oil Pump ] Oil Pump

23 Driveshaft for oil pump

24 8 Nm + 90°

• Replace

25 Gasket

• Replace

26 9 Nm

27 Intake tube

• For oil pump

28 Oil strainer

• Clean

29 Oil baffle

30 5 Nm + 45°

• Replace

31 Rubber buffer

32 9 Nm

33 Seal

• Replace

34 Oil drain plug, 25 Nm