Operation CHARM: Car repair manuals for everyone.

Diagram 141/14 (Tracks 169-182)






IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Auxiliary Engine Coolant (EC) Pump Relay, After-Run Coolant Pump, Right Electrohydraulic Engine Mounting Regulator Valve, Intake Flap Motor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J217 - Transmission Control Module (TCM) Overview of Control Modules

J496 - Auxiliary Engine Coolant (EC) Pump Relay Overview of Relay Carrier

J623 - Engine Control Module (ECM) Overview of Control Modules

N145 - Right Electrohydraulic Engine Mounting Regulator Valve

N280 - A/C Compressor Regulator Valve Components Outside Passenger Compartment

T16c - 16-Pin Connector, black, on transmission control module (TCM)

T60a - 60-Pin Connector, black (Connector A), on engine control module (ECM)

T94a - 94-Pin Connector, black (Connector B), on engine control module (ECM)

V51 - After-Run Coolant Pump Locations

V157 - Intake Flap Motor 5.2L BXA Overviews

(167) - Ground Connection 4 (in engine compartment wiring harness)

(D107) - Connection 5 (in engine compartment wiring harness)

* - Relay Carrier Electronics Box (plenum chamber, left)

Previous Diagram 141/13 (Tracks 155-168)

Next Diagram 141/15 (Tracks 183-196)