Bang and Olufsen Speakers, In Rear Shelf

Radio System

BANG and OLUFSEN Speakers, in Rear Shelf

• On the BANG and OLUFSEN sound system, Subwoofer (on rear shelf) (R157) and Left Rear Midrange Speaker (R105)/Right Rear Midrange Speaker (R106) are installed in the rear shelf.

Removal and installation of Left Rear Midrange Speaker (R105) and Right Rear Midrange Speaker (R106) are identical.

Removing Subwoofer (on Rear Shelf)

- Remove rear shelf.

- Disconnect electrical connection - 2 - on subwoofer (on rear shelf) - 1 -.





- Remove screws - arrows - (2 Nm).

- Remove subwoofer (on rear shelf) - 1 - upward from rear shelf.

Installing

- Install in reverse order.

Removing Left Rear Midrange Speaker

• Left rear midrange speaker/right rear midrange speaker are fastened with bolts to underside of rear shelf. The wires of both end in a 4-pin connector (T4y). When replacing, the respective wires must be pin-separated.

- Remove rear shelf

- Remove bolts - arrows - (3 Nm) from rear side on left rear midrange speaker - 1 -.





- Remove left rear midrange speaker - 1 - with wire from rear shelf.

Installing

- Install in reverse order.

Removing cover of Left Rear Midrange Speaker

• The left rear midrange speaker is threaded onto a ring and this is bolted to the rear shelf. The left rear midrange speaker does not need to be removed to remove the cover.

- Remove rear shelf.

- Remove bolts on speaker ring - arrows - (3 Nm) starting from rear side.





- Remove left rear midrange speaker with ring - 1 - and set them both aside.





- Remove speaker cover - 2 -.